Plumb pak tee adapter, nominal size: 3/8 in, female x tube x tube connection, brass, rough brass

BRASS CRAFT SS GAS CONNECTOR 3/4

For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.

For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

For used with cold water applications, TPV seats NBR O-rings, fits both Schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.

Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated brass ball, Teflon seats and rust-resistant handle. 125 psi max working pressure. 3/4 in hose thread outlet. IAPMO NSI/NSF 61 Approved. Pipe threads comply with ANSI B1.20.1 hose threads comply with ANSI B1.20.7. Handy carton: bin box display packaging; each valve has a data tag with installation instructions and is bar-coded for easy identification. Carton.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Series LFN45B lead-free water pressure reducing valves are used in commercial and residential applications to reduce incoming water pressure to a predetermined level, thereby protecting downstream plumbing system components and reducing water consumption. Designed for easy accessibility and serviceability without removing the valve from the line. Standard pressure setting is 50 psi with an adjustable range of 25 to 75 psi (172 to 517 kPa).

VALVE STRT 1/2FIP X 3/8

Lead-free

Water supply line valves fip inlet x compression straight no lead fip inlet x od=1/2 x 3/8 Chrome.

Chrome. Chrome.

1/4 O.D. Tube outlet for 3/8''- 3/4'' O.D. tubing or iron pipe.

Gas leak detectors liquid size 2 ounces Used for natural, LP gas, mixed, manufactured, and LP gas-air mixtures.

Silicon bronze cast body and poppet contain less than 0.05% Lead. Furnished with Buna 'N o-ring, stainless steel spring, washer and locknut. All valves
through 1-1/2 have a working pressure of 400 PSI. All valves 2 and larger have a working pressure of 600 PSI.